Activity
From 2013-10-19 to 2013-11-01
2013-11-01
-
18:48 Feature #1636: Support for Oculus Rift
- skyjake wrote:
> If you want to shoot where the camera is pointing at, you need to use yawbody.
>
> With yawhead,... -
17:18 Feature #1636: Support for Oculus Rift
- cmbruns wrote:
> So I should be using yawhead while implementing view-to-aim, right?
If you want to shoot where t... -
- skyjake wrote:
>The "yawhead" instead turns the camera viewpoint while keeping gun direction the same in world coord... -
- A further note about "lookpitch". If the control's position is 1.0, it means the player's actual look pitch is 85 deg...
-
- cmbruns wrote:
> I started adding Pitch control. Even if I set @ev.axis.type = EAXIS_ABSOLUTE@ in @DD_ReadHeadTracke... -
- skyjake wrote:
> I have now added some new player controls and implemented them (roughly) on game-side. Check the co... -
- Scheduling this for 1.13. Anything that cannot make it in time for a mid-December release should be pushed to a conti...
-
- Unscheduling for now, since preferably some form of game rules would be needed for a good fix.
2013-10-31
-
23:11 Feature #1503: [Unix] Basic command line options (e.g., help, version)
- There seems to be a fair degree of feature overlap with the in-game help presented via the console. Maybe we can bind...
-
- To do this the right way, all the command line options should be documented using Amethyst much like console commands...
-
- I have now added some new player controls and implemented them (roughly) on game-side. Check the commit notes for det...
-
- cmbruns wrote:
> [...remaining tasks...]
I can create a continuation task for the more forward-looking / non-Rift... -
- To be able to adjust the hud item placement in Rift mode, it might be useful to be able to independently adjust the s...
-
- FS1 acts as an extension layer over the native file system, allowing one to look up resources and locate other needed...
-
- Continuing the work started in #1636, Doomsday's stereoscopic 3D capabilities could be further enhanced with:
* Ocul...
2013-10-30
-
- _(merged with previous comment)_
-
- danij wrote:
> So as to better my understanding of this - is this approximately what your implementation is doing?
... -
- Nice work. At least for cross-eye viewing your screenshot is converging well for me.
So as to better my understand... -
- skyjake wrote:
> I can help debug it if you commit the @GLTarget@-using version to GitHub.
With your help, I got wa...
2013-10-29
-
- vermil wrote:
> I see. In the past, I've interpreted 'ignore' as literally that :)
You're right, it can be misund... -
16:40 Bug #1644: [HeXen beta demo] Should have Heretic crush behaviour
- I see. In the past, I've interpreted 'ignore' as literally that :)
-
- I hear you, and agree that this should be fixed in the name of emulation correctness when it comes to the Hexen beta ...
-
- If the sprite for crushed mobjs was in the beta version Iwad and if Heretic hadn't removed the feature from Doom (rem...
-
- I'm lowering the priority to our lowest rating because:
* the number of people using the beta demo must be quite sma... -
- The ability to edit ones posts appears to work :)
Thanks. -
- vermil wrote:
> Right, time to clean up all my rambling above; it's cases like this that I wish users could edit and... -
- Right, time to clean up all my rambling above; it's cases like this that I wish users could edit and/or delete their ...
-
-
- Also, the contents of the autocompletion popup are not always up to date. Most likely a bug with the popup reshowing ...
2013-10-28
-
- But what about non FMOD plugins?
SDL Mixer for instance. -
- Ok, test using original Wolf3D sounds appears to show the original issue is fixed; though the volume of them seemed a...
-
- My apologies; ignore the assertion that the original issue was fixed; I used the wrong sounds to test. I have to rip ...
-
- By FMOD fixing the issue, I mean, the sounds are no longer replaced with distortion.
Maybe not entirely related, b... -
- I have now noticed that I was asked to test this about a year ago. My apologies for missing this until now.
FMOD d... -
- Not the most technical subject heading.
In the HeXen beta demo, mobj corpses crushed by a crusher aren't turned in... -
- cmbruns wrote:
> RE: Latency
> I've been giving latency some thought. I think we could possibly survive forever wit... -
- skyjake wrote:
> ...So in @clientwindow.cpp@ or other client sources, one shouldn't use the public API (@Con_Get*@) ... -
- cmbruns wrote:
> skyjake wrote:
>> Naturally, on game-side, the VR variables have to accessed via the Con_Get*() fu... -
- cmbruns wrote:
> I'm struggling with the warping.
> I'm trying to paint to an offscreen buffer and then just paint ... -
- I'm not familiar with that area of the codebase but I expect this is because glprogram.cpp resides in libgui and ther...
-
- I'm struggling with the warping.
I'm trying to paint to an offscreen buffer and then just paint it back on the scree...
2013-10-27
-
- skyjake wrote:
> Yes, @GLTarget@ and @GLTexture@ should be used here. The only potential issue is that I haven't yet... -
- cmbruns wrote:
> I notice there are some classes like GLTarget and GLTexture that would appear to wrap the functiona... -
- danij wrote:
> Skyjake is better placed to advise on such matters as he has only recently implemented those componen... -
- Integrating head tracking via the existing binding system is definitely the better approach, regardless of optimal la...
-
- Shifting gears for a moment...
To do the oculus rift warping, I need to do the following:
# Render the whole scen... -
- cmbruns wrote:
> Is it possible for a noob like myself to add a new virtual input device? Or is that something you g... -
- skyjake wrote:
> With the current input system and renderer we should be able to (quite easily) handle 35 Hz input o... -
- cmbruns wrote:
> For clarity, let's get quantitative here. I was being a bit hyperbolic when I said that every milli... -
- danij wrote:
> Hacking it in would inherently mean that player movement lags behind the refresh update. While it wou... -
- Hacking it in would inherently mean that player movement lags behind the refresh update. While it would certainly be ...
-
- danij wrote:
> Indeed I would agree that implementing the roll angle tracking and then moving on to geometry warping... -
- If the input from the head tracker effects the angle at which the player moves then this fundamentally requires an in...
-
- skyjake wrote:
> @DENG_USE_OCULUS_RIFT@
Got it. Will do.
> Naturally, on game-side, the VR variables have to acc... -
- I rather see this from the perspective that the lack of zero-latency input is a serious bug.
-
- danij wrote:
> It seems to me that to fully integrate the Oculus head tracking it must be folded into the binding sy... -
- It seems to me that to fully integrate the Oculus head tracking it must be folded into the binding system in a simila...
-
- cmbruns wrote:
>>I will need to link to the Oculus SDK. This should be a totally optional build option.
> OK I got ... -
- Commit commit:c7debe3 should address the missing icon in Add/Remove Programs/Control Panel. It appears that Inno Setu...
-
- I'm not sure this can be entirely fixed. Particularly the icon appearing in the Add/Remove Programs dialog is most li...
-
-
-
- Doomsday's Windows installer is currently based on Inno Setup. However, "WiX Toolset":http://wixtoolset.org would ena...
2013-10-26
-
- danij wrote:
> Re: UI and HUD drawing
>
> It would be useful for future development/maintenance to have a visual ... -
- Re: UI and HUD drawing
It would be useful for future development/maintenance to have a visual representation of th... -
- cmbruns wrote:
> The Roll angle has no gameplay effect...
...but if we wanted to get really fancy, the rotated hu... -
- cmbruns wrote:
> To implement head tracking, I will need to link to the Oculus SDK. This should be a totally optiona... -
- I have added a number of different stereo 3D modes, and lightly tested most of them. Basic stereoscopic functionality...
-
- skyjake wrote:
> cmbruns wrote:
> > Are your changes committed to your github oculus-rift or master branch? I'd lik... -
- cmbruns wrote:
> Are your changes committed to your github oculus-rift or master branch? I'd like to stay in sync, a... -
- skyjake wrote:
> Nicely done. I pulled your changes and applied some fine-tuning: the mouse coordinate mapping is on... -
- BTW, don't worry too much about conforming to our coding/naming conventions. When we're done, I'll update/rename cvar...
-
- cmbruns wrote:
> Using skyjake's awesome side-by-side composition as a starting point, I created 3 stereoscopic mode... -
- One more thing: In my haste, I hard-coded the player point-of-view height to 41.0 map units above the floor. Where sh...
-
- I finally got the build environment working. First on the command line, then in Qt Creator.
Using skyjake's awesom... -
-
- I cannot reproduce this. Perhaps there is an issue with bindings? Try:...
2013-10-25
-
- skyjake wrote:
> cmbruns wrote:
> > For Oculus Rift and cross-eyed viewing, the aspect ratio would need to be corre... -
- cmbruns wrote:
> For Oculus Rift and cross-eyed viewing, the aspect ratio would need to be corrected back to normal ... -
- Monster behavior does fit very well into the game rules concept.
-
- Perhaps an integrated mechanism using DED 2.0 selectors and Game Rules?
Concept syntax:... -
- I'm wrote the above to suggest that Dday may actually already have the code largely ready to fix ths issue, in Hereti...
-
- The Nightmare stuff not saved in save games, seems to be the same stuff that the BFG Edition is missing entirely.
...
2013-10-24
-
- skyjake wrote:
> The downside with the current renderer is that it will not be very efficient to render the same fra... -
-
- The branch "oculus-rift" is now on GitHub. I've made some initial changes: I've verified that the entire UI can be dr...
-
- cmbruns wrote:
> Would you mind thinking about how such a composition of views might work within your current archit... -
- List of higher-level tasks needed for Oculus rift mode:
* Stereoscopic 3D (in any form)
* Side-by-side scene comp... -
- I brought up side-by-side scene composition in my previous comment because it is a tricky topic and deserves some cog...
-
- skyjake wrote:
> cmbruns wrote:
> > I just implemented an Oculus Rift mode for gzdoom http://rotatingpenguin.com/gz... -
- cmbruns wrote:
> I just implemented an Oculus Rift mode for gzdoom http://rotatingpenguin.com/gz3doom/.
> I'd like ... -
- Refocusing this issue to be about scriptability of Doomsday's UI framework. The game menus are a separate (sub)topic ...
-
-
-
- Profiling shows one of the heaviest elements in the map renderer is lookups via GridMap.
-
- The Shell needs an easier way to pick basic game options such as which map to play, deathmatch/coop mode, and other M...
-
2013-10-23
-
- skyjake wrote:
> Oculus Rift is cool and we should have support for it in the renderer.
>
> However, having dabbl... -
- Oculus Rift is cool and we should have support for it in the renderer.
However, having dabbled with stereo 3D, the... -
- We should switch to using Qt 5 when it is stable and full-featured enough for our needs.
Current status is that al... -
-
-
-
- Thanks for the correction.
-
- Pardon me for interfering, but I am wondering, if Skyjake is misinterpreting the issue here:
In Vanilla Heretic an... -
- In the above situation InFine would opaquely generate a new material variant specific to the context/scope of the scr...
-
- I see. From an external point of view (let say in the InFine implementation), one shouldn't have to worry about this ...
-
- Ah, yeah. In that case it sounds like he wants a per-surface material scaling factor (XG 2.0?)
-
- tolwyn wrote:
> in a def file per sector number
That sounds like a different thing altogether...
Maybe we shou... -
-
- It does appear to be fixed yes.
On another note; the Ximage command is cool and all, but it can only be used with ... -
- Maybe vermil could then re-evaluate the status of this request?
-
- I will add that yes I am aware, that rocket splash damage doesn't trigger XG. I refer to the actual rocket above.
-
- What spurred me on these issues was that I made a couple of mods/reimages of other games in the past, that I didn't q...
-
- Then we can at most add a compatibility option for enabling or disabling more accurate hit testing for fast-moving ob...
-
- There is now a Feature for HDR: #1635.
-
- We should consider the role of High Dynamic Range rendering in the next-gen renderer's lighting system.
It should ... -
- I've raised the priority as this sounds reproducible.
(Also updated wiki link.) -
- Also, bad Skyjake: Wrong wiki :p
http://www.doomworld.com/vb/doom-general/52973-doom-wiki/
http://www.doomworld.c... -
- Given that actual 3D models already exist, I don't think this would be really worth the effort.
-
- danij wrote:
> Surely, this mandates that both monitors are exactly the same and configured in exactly the same way.... -
- > Hexen "localized [earth]quake" effect
BTW: when playing Hexen I noticed that this effect was curiously exaggerat... -
- Yeah, a custom, deterministic RNG for each generator should be possible and it sounds like the preferred solution here.
2013-10-22
-
- I've just tested the Wyvern battle and after killing the Ettin in the middle it dropped down to the floor and stayed ...
-
- I suspect that specific behavior (flying down to the floor) is a actually a symptom of a more general broken flier be...
-
- I believe the Death Wyvern's flight AI does have a flaw that can cause it to fly into the middle pillar under some ci...
-
- I've seen this happen a few times, though I can't be certain whether its not also present in vanilla (needs testing).
-
- While playing through Hypostyle's boss battle (flying dragon thing in big lava room), it got stuck in the base of the...
-
- Yep, its certainly not specific to our port.
-
- This is actually a carry over from Vanilla Doom.
http://doomwiki.org/wiki/Some_game_options_not_preserved_in_saved... -
- The underlying cause of this is that game rules are not handled correctly, neither serialized properly to saved games...
-
-
- Yes, the two are intrinsically related.
-
- Does this have anything to do with #1078?
-
- My long term plan for the material system is to allow new materials to be defined on the fly and not just during star...
-
- danij wrote:
> As materials are animated automatically, without the game knowing about it there is no way for the ga... -
- Yep, that is precisely the cause. Its a flaw in the vanilla algorithm for detecting crossed lines, which, we can't ch...
-
- Perhaps occurs when a missile travels so fast that the hit testing range skips over some line?
-
- No, presently the DED parser does not support the "mods" directive on MapInfo definitions (it should...).
-
- Is there support for, e.g.:...
-
- The issue with using a blank model definition, is that it requires the user to have turned models on.
I'm also ima... -
- Note that in the past mod authors have used a "null model" definition for this purpose.
-
- Is the objective to effectively completely replace a sprite with particles? If so, would this only affect sprites or ...
-
- I'll need to retest this but OTOMH this was fixed some time ago, along with the related issues of models facing the w...
-
-
- Perhaps a mechanism that interprets Hexen's MAPINFO data into Doomsday MapInfo definition patches which can be applie...
-
- I suspect solving this properly would require a system that fully ties together Hexen's MAPINFO and the Map Info defi...
-
- This sounds like a caching issue to me.
-
13:33 Bug #1631: Doom 2 finale: animation speeds for the Cast
- Is one example of this how you notice the Arachnotron and Spider Mastermind immediately drop down to the side and ont...
-
- The first death state of each mobj in the cast call at the end of Doom2 (and Final Doom), appears to be being display...
-
- The same mechanism should also integrate Hexen's concept of "hubs" alongside Doom's "episodes". Conceptually the two ...
-
- Note that multiplayer map cycling should use the same underlying mechanism as the regular map progression, the differ...
-
- See: http://www.youtube.com/watch?v=8VHGBxgBitc
Doing voxels properly in GL is actually quite complicated. -
- Please provide more information / links / diagrams / etc. to describe your idea in more detail. As it is, I don't rea...
-
- I question whether sharing of a GL-context is possible. Surely, this mandates that both monitors are exactly the same...
-
- Proper multi-monitor support implies support for multiple/split game windows. In recent times Doomsday's window manag...
-
- We already have issues due to depth buffer precision in large maps, where the sky stops rendering correctly. Before d...
-
- The thing to watch out for is loss of Z precision in far distances, though.
-
- We do indeed already support using any texture type on any surface. This is implemented opaquely via the Material mec...
-
-
- @danij, do we already support regular textures on planes, and if so, they must tile in a non-64x64 size?
-
- For instance, generating a normal map dynamically based on objects contacting the surface: water ripples, etc. Likely...
-
- Can you give an example of where such an effect would be used?
-
- Particles rendered to textures, for e.g. fire/water effects ala Unreal.
@libgui@ has @GLTarget@ for managing offsc... -
- The texture manager should already support this, yes.
-
- I'm not sure if this actually implemented already?
-
- Perhaps the translation could be specified with an inline Doomsday Script?
-
- Maybe using some sort of palette translation?
-
- No, it has not been merged. However, I would now prefer to re-implement this rather than attempt to merge in that old...
-
- Has the aforementioned work actually been merged into the master?
-
- I believe what vermil was looking for is a way to apply dynamic lightings to a surface that is already "fully bright"...
-
- I can't really grasp what is being suggested here; closing.
-
- In my opinion this is something I would expect to see in a mod rather than an explicit feature. Once Doomsday Script ...
-
- Might be included in the MP game rule set, however requires some new game logic. Perhaps could be done entirely with ...
-
- The more important use case here is the portal effects as this enables all manner of algorithms which are presently b...
-
- Drawing a client window or any camera view to a texture, for example for security camera's and portal effects.
Als... -
- Open question: Should fog "volumes" be defined using map geometry primitives (i.e., lines and vertexes) or via some o...
-
- Area based fog, for instance using XG sectors.
Quite important for submersed environments, e.g., underwater. -
- We need to carefully consider the logically separation between mobj and particle generator. Particles which affect th...
-
- Given that Heretic/Hexen's mechanism for splashes is game-side and involves mobjs and sprites not present in Doom, th...
-
- Note that Hexen already implements a basic version of this for use with the "localized [earth]quake" effect. The "pro...
-
- I like this idea. It is similar to camera vignette in that it brings some extra realism. However, it should be reserv...
-
- Can't we seed the RNG used for particle effect randomization? This would mean that provided the same generators are u...
-
- While it is not feasible to record all the individual particles into a demo, the particle generator definition and an...
-
-
-
- To make this appear more similar to vanilla, one would have to fudge the Z values at the floor height because in the ...
-
- Closing this; the matter should be dealt with in feature #1458.
-
- Shininess/reflections should definitely be handled with shaders and reflection/cube maps.
-
- See: "Map update agents":http://dengine.net/dew/index.php?title=Map_update_agents proposal
-
- Presumably needed for creating billboard-like particle models?
-
- Closing this as obsolete. All future effort should instead be put into shader-based shiny/reflection mapping.
-
-
- Could just be a vanilla Hexen bug?
-
- The interactive console is intended to be a nice and easy way to modify engine configuration and execute certain comm...
-
- InFine is a specialized language for specifying UI animation scripts. It also has some features for interactivity, ho...
-
-
- http://doomwiki.org/wiki/Doom_3:_BFG_Edition
This page contains a comprehensive list of changes to Doom1 and Doom2... -
- Sounds like it would make sense to add a new game mode "doom2-bfg" for this purpose.
-
- This is definitely in progress, however no one has had the time to actually try to collect 64-bit versions of all the...
-
- In Doomsday 2, this sort of things should be possible to do via scripting. Even so, some native functionality may be ...
-
- It makes sense that if a weapon name is defined, it should be used in all the places that refer to that weapon.
-
- I must say that during my recent playthrough of Hexen, I did not notice this at all and thus I wonder if it is very b...
-
- This is because the Attack control is not implemented as an impulse (which does not have a time duration component), ...
-
- Doing this would entail slightly rewriting md2tool with dynamic arrays etc.
Hopefully, going forward, MD2s will be... -
- > Question : Is jDoom capable of understanding ACS?
Not presently; see #1252.
-
-
-
- This should be considered in the larger context of the lighting system for the next-gen renderer (#7).
-
- Sounds pretty easy to implement though (provide a patch?).
-
- On a general level, this is important for realism of sound effects in a 3D setting. Fortunately, FMOD should provide ...
-
-
- Closing as obsolete.
-
- Could simply be a flag in the InFine definition (pause when game paused).
-
-
- It is not ideal that game menus are completely hard-coded into the game plugins. Also, implementing the game menus di...
-
- On a general level, it would make a lot of sense to have InFine draw the map title, however this requires serious upg...
-
- Thanks to Qt's built-in mechanisms for this, the new UI framework is already going towards this direction. However, t...
-
- "Standard definitions" are the ones included in the official Doomsday distribution packages.
Once Doomsday support... -
- XG 2.0 needs to include the vanilla types in the standard library of XG line/sector types.
-
- I have a feeling XG 2.0 will not retain the chain mechanism as-is, however thanks to scripting there will be proper d...
-
- To do this correctly, one would have to save the time elapsed since the start of the music and then after loading, se...
-
-
- Closing this as obsolete. @libdeng2@ already has the ability to treat .zips just like ordinary folders, and resource ...
-
- Maybe in Renderer Settings → Developer popup?
-
- The Audio Settings dialog should contain a toggle for stopping overlapping sounds from the same origin. In the origin...
-
- This can be done with @"sound-overlap-stop 1"@.
-
- Closing as obsolete, since one can now use fluidsynth with a suitable soundfont to produce similar end result on Linu...
-
- This composite issue has been split into separate ones under Issue #7.
-
- Instead of a simple flat surface with a couple of triangles, a surface could be created using a mesh which could be s...
-
- Bump/Specular/Enviroment/Reflection/Procedural mapping for models/walls/flats.
Would greatly enhance the look of ... -
- Support for vertex and fragment shaders for surfaces, objects, and UI.
@libgui@ already implements the basic suppo... -
- We should replicate the original games' depth shading as closely as possible.
In practice, the depth shading gradi... -
- This is partially implemented in the form of @WidgetActions@. In @ConsoleWidget@, we could capture non-text inserting...
2013-10-21
-
-
- I personally think this should be ignored because it would result in dependencies between the playsim and graphics sy...
-
- In practice this would require the particle logic to make hit tests against mobjs, which may be difficult to pull off...
-
- Actually that would probably be a better solution anyway, given that mobjs can be reanimated (e.g., Archvile in DOOM).
-
- Might be more elegant to set a scope condition (or some kind of selector) that says the target must be a mobj with he...
-
- The request is a bit vague, but it sounds more like an idea for a mod than something we should do in the engine or th...
-
- While the example case is a bit outdated, I fully agree a scoping mechanism must be consistent in syntax and semantics.
-
- It is true that this information is already available, however accessing it easily would not hurt.
-
- Maybe this should just be merged into Feature #7?
-
- The basic idea is good and should be elegantly addressable with Doomsday Script expressions and longer scripts embedd...
-
- Closing this as obsolete, as (Scripted) Info will be used as a basis for definitions in the future.
-
- This is already almost possible with a Map Info definition that executes a bunch of spawnmobj commands. The caveat is...
-
- There should be a way to specify the map/hub progression in a completely unlimited way using definitions.
This cou... -
- The "done" portion refers to the existing logic for doing this sort of tuning of objects (statues, torches).
-
-
- Not enough information.
-
- Also, shaders should be supported.
-
-
-
- Some conditions (e.g., scopes) can only be determined at runtime as the game world is dynamically changing. This mean...
-
- XG 1.0 is quite limited and contains plenty of hard-coded functionality. It needs to be integrated with Doomsday Scri...
-
- As mentioned in #1319, having massive amounts of objects on the screen will make it difficult to draw all as 3D objec...
-
- Changed title to more accurately describe what is being discussed here.
-
- Stereo sound effects are a bit problematic in a 3D setting like Doom where the left and right channels are mostly det...
-
- Marking this as "in progress" because some work has been done toward multiple simultaneous viewports and separate bin...
-
- Closing as incomplete (request is just a question).
-
-
- This might have some value as a compatibility feature, assuming the lump was being used for some Doomsday-specific ni...
-
- Given a scoping mechanism is in place, I don't see any need for a map-specific definition set. All such a feature wou...
-
- > If this lump is found then obviously the Wad Interpretation Conditions should not be used.
I'm not sure why, thoug... -
- This is should be taken care of via feature #1264 and related features.
-
- In practice, libdeng2's @Record@ could play a major role in resolving these scopes. Similarly to how Doomsday Script ...
-
- Often it is necessary to limit the effect of some definition or variable to a specific map, episode, game, global var...
-
- Essentially there should be a mechanism that enables one to set up a trigger condition and then start various effects...
-
- Creation of an external definition to govern the visual effects of power-ups, damage, killed etc.
Maybe a standard... -
-
- Fading the projectiles away should be a suitable solution here.
-
-
- > selector for sprites
That's a nice idea; added feature #1616. -
- I don't know if this is appropriate to post in this issue, but it might also be interesting to see the selector mecha...
-
- _(suggested by vermil)_
It might also be interesting to see the selector mechanism of models extended to sprites...
2013-10-20
-
- This use case requires runtime evaluation of condition expressions instead of the basic load-time execution that @Scr...
-
- Floor/ceiling (or other) planes that have a freely chosen normal vector.
-
- I believe FMOD takes care of this with 3D sounds and the appropriate speakermode option (-speaker51).
-
- This sounds like something that's perfectly doable with InFine and demos.
-
- There is a related proposal: "Input drivers":http://dengine.net/dew/index.php?title=Input_drivers
-
- This is actually quite important because users sometimes rely on --help/-h and --version/-v to query basic usage info...
-
- This is partially done now: one can select specific interfaces with command line options.
-
-
-
- Closing as obsolete (see #1614).
-
- I closed this old RFE because it was worded more like a support request. The presented idea itself is now essentially...
-
- My apologies, I now see that yourself is trying to consolidate a list of features for the new demo recording system u...
-
- Apologies for interfering, but why close what could still be considered an RFE for the new demo recording system in f...
-
- The old demo recording implementation will be replaced, so this is now obsolete.
-
- The demo recording and playback system needs to be completely revised.
Features:
* Recording a demo on the server... -
- There is also the anomaly of the 'chgun' sound def in Doom's sounds.ded. I'm not sure if it was in Vanilla Doom or no...
2013-10-19
-
- "Doomsday Script":http://dengine.net/dew/index.php?title=Doomsday_Script_reference should be integrated into all rele...
-
-
- There should be a way to reset any settings to defaults.
In practice, this could be done by utilizing @SettingsReg... -
- _(original issue reported by vermil)_
Not version specific (i've tested it in 1.8.6 and beta4).
Not so much a b... -
- This is effectively implemented by @SettingsRegister@, for instance the renderer appearance profiles are "global", i....
-
- This one?...
-
- Changed priority to Low because the OpenGL version check must be manually disabled for this situation to occur.
Also available in: Atom