Activity
From 2012-02-28 to 2012-03-12
2012-03-12
-
11:38 Bug #1003: [Hexen] SEGV during 3D weapon use
- The underlying issue (that of a degenerate subsector) has been fixed for Monday's build451.
-
10:09 Bug #1003: [Hexen] SEGV during 3D weapon use
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/b8af9a2d/b784/attachment/savegame.zip
-
10:27 Bug #567: Resolution always resets to 640x480
- Will be affected by the changes in the "qapp-based" branch: I'm planning to implement persistent window geometry.
-
- The problem appears due to double SDL_SetVideoMode. First SDL_SetVideoMode is called from createMainWindow() in dooms...
-
- Will be affected by the "qapp-based" changes. I think I'll add an event that tells the engine when focus is lost so t...
-
- Will be addressed in the "qapp-based" branch for 1.9.8/9.
-
- Sound priorities defined in the definitions were being ignored. This was fixed for build 437; please recheck the soun...
2012-03-10
-
- Some offline comments:
- - - - - - - - - - - -
This assert fails in P_NewParticle():
> pt->sector = R_PointInS... -
- The patch from git does not fixes SEGV. The bug can be reproduced as described in the fitst message.
-
- Originally reported by simc: http://dengine.net/forums/viewtopic.php?f=7&t=1006#p6623
-
13:35 Bug #1007: [Doom] Sound emitter overlap handling
- The specific discrepancy I stated above is fixed (I used 438, but I assume that doesn't matter).
However a new dis...
2012-03-09
-
- I'm getting the "floating" end state in a Mac debug build, too.
-
- Load Heretic with the attached DED in a _DEBUG build and switch to the Blaster. The weapon should fire, lower and rem...
-
- In the original game, the Cyber Demon and Spider Demon sight sounds were except from the rule (i.e. they were never c...
2012-03-08
-
- This will be affected by the "qapp-based" branch: the drawing canvas can be captured easily with Qt. We could then cu...
-
- When running with a resolution such as 1366x768, the screen capture done by busy mode for the transition effect (e.g....
2012-03-07
-
- Bad screen capture for busy transition
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/636fa1db/...
2012-03-06
-
- Fixed for 1.9.8. It was caused by GL matrix stack overflow due to a missing stack pop when the HUD log messages were ...
-
- It appears the GL error occurs when msg-show is set to zero.
-
- 1. Run with the attached .cfg file.
2. Start a game (doom1-ultimate E1M1), wait for the map title to disappear.
3. ... -
- Currently one can only add dlights to individual mob states that are full bright or whose mob defs have the mf2_alway...
2012-03-05
-
- - **labels**: jDoom Gameplay --> Doom, Automap
-
- Spotted one more instance of incorrect submodel alpha; now jdrp101+11a+fixes.pk3 works correctly, too.
-
- Opening for further investigation. The submodel alpha seems to fix the barrel in jDRP 1.01, but does not affect jdrp1...
-
- Doom game config
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/7a20474f/3633/attachment/game.cfg
-
- Tree_Destructive, build427
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/e31334bb/e6b3/attachm... -
- 3D Tree_Destructive looks light grey but should be light brown as in older versions. Please, look at the attached scr...
-
- Screenshot before setres
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/cf3c1382/937f/attachmen... -
- Will be addressed in the "qapp-based" branch.
-
- Screenshot after setres
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/cf3c1382/21c0/attachment... -
- After setres X Y particle textures are not displayed during effects produced by Generator.
How to reproduce:
1. S... -
- The crash was caused by null pointer access. Some of the particles created by the "lightning" hit effect didn't have ...
-
- Using 3D weapon near walls causes segmentation fault.
How to reproduce:
1. Copy Axe 3D model from http://coloca... -
- Applied patch. Thanks!
-
- make uninstall leaves empty share/snowberry directory. The attached patch fixes the issue.
*Labels:* Build System -
- _(originally posted by anonymous SF.net user)_
I've had this happen a few times. I don't think the problem is multip... -
03:54 Bug #995: [Doom] Shotgun Guy drops multiple Shotguns?
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/75299c8a/1dee/attachment/SHOTGUNTESTCASE1.ZIP
-
00:21 Bug #1000 (Closed): [Heretic MP] SEGV during item use (2 clients)
- When playing a network Heretic game, from a dedicated server and two players, using an item causes a SIGSEGV on my Ce...
2012-03-04
-
- Fixed for 1.9.8 (in Friday's build #476).
The client was attempting to play the Use sound of an invalid inventory ... -
- Ah. I seem to have made a mistake and forgotten the '2' on some of the 'flag2'.
My apologies. -
- Cannotpush is a 'mf2' flag.
Please have a look in flags.ded to see this. -
- All flags in a Thing's Flags2 field must be "mf2_" flags. It is illegal to use "mf_" flags in it.
Therefore, the D... -
- http://pastebin.com/GWiaCGxG
-
- The old format mob flag 'mf2_cannotpush', from this ded, seems to accidently be translated to 'mf2_mf_cannotpush' in ...
-
- Thank you for the fix.
-
- I fixed the issue of the missing slime, which was caused by an incorrect number type for alpha in the submodel setup....
-
- Previous assumption about ded parsing is incorrect. Flag "shadow1" makes Barrel-Slime.md2 model invisible.
-
- Maybe not entirely on topic.
But I will agree that at least some old format flags don't appear to be being converted... -
- See http://dengine.net/forums/viewtopic.php?f=7&t=970
Problem with loading/processing the detail texture image for... -
- See http://dengine.net/forums/viewtopic.php?f=15&t=979
*Labels:* Hexen, Polyobjs -
- See http://dengine.net/forums/viewtopic.php?f=7&t=967
*Labels:* User Interface -
- Ok, it appears I encountered this issue. I uploaded a zip file which contains screenshots, the doomsday.out, and a sa...
-
- Lowering priority based on rarity.
-
- This has happened to me on occasion while playing Doomsday. Sometimes, I will kill a single Shotgun and he will seem ...
2012-03-03
-
- Vanilla Hexen has a fixed limit on the number of mobjs which can be given a TID (MAX_TID_COUNT:200). This fixed limit...
-
- - **priority**: 6 --> 5
-
- Save Game menu in Heretic
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/a226f15e/58c3/attachme... -
- Input box is too narrow in Save Game menu. It allows to enter savegame name over the right border. Also, the right bo...
-
- In Vanilla Doom, if you used the IDDT cheat, Dave D. Taylor's initials would be placed on the white arrow representin...
-
- It could be fixed by changing Flags in D-Barrel.ded:
Model {
State = "BAR1"
Flags = autoscale
Inter =... -
- Barrel without slime in Doomsday 1.9.7 stable
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/97... -
- 3D-model of barrel is displayed without slime in it. I'm not sure is it an issue of engine or the model.
How to re... -
- 1) In Vanilla Doom, when pressing the IDBEHOLD part of the cheat, the game will prompt you with a message to select a...
-
- On the episode 3 intermission screen in Ultimate Doom, there are several bloodsplats (indicating that a level is fini...
-
- FMOD should be capable of playing any sample frequency as it does it's own mixing/interpolation. Doomsday shouldn't b...
-
- Should Doomsday intelligently try to complete the available audio interfaces whenever possible? For example, if the u...
-
- Ah yes, this was about the definitions.
The earlier suggested solution of hiding the par time if undefined seems t...
2012-03-02
-
- No, this isn't fixed in 1.9.7
-
- Fixed in 1.9.7?
-
- No, the logic is the same as are the lists of lumps used to validate the IWADs. We still need a copy of this IWAD to ...
-
- Does the ringzero resource validity checks address this at all?
-
- Yes this was addressed for 1.9.7.
-
- Was this addressed in the recent menu changes for 1.9.7/8?
-
- In 1.9.8 it is possible to pick and choose which audio interface to use for SFX, Music, and CD audio. So for instance...
-
12:52 Feature #1517: Autoselect missing interfaces from other audio plugins
- all have the same prob, it seems they went backwards for a while, beta 6 and 7 do not even play midis, which is the ...
-
- Yep, fixed.
-
- Fixed for 1.9.7?
-
- This is normal. In the original games, Pain Elementals will only spit Lost Souls if there is less than 21 of them on ...
-
- This sounds like you haven't loaded them. Enable verbose messages and check your doomsday.out to see what is being lo...
-
- Upon discussion with Vermil this report should be interpreted thus:
Artifact is a behavioural difference between D... -
- It occurs with any of the audio drivers. This issue appears to be a result of the upsample conversion in the engine i...
-
- Occurs with FMOD, I take it?
-
- No this still occurs. I've been thinking it could be our own alt_is_down state that is going out of sync. I'll see if...
-
- Should be fixed?
-
- I meant to say Beta6.7 above.
-
- - **labels**: jHexen Gameplay --> Hexen
-
- Fixed the way the Wind sounds are played and prioritized for 1.9.8.
-
- Offline comments from danij:
"It seems to me that you were on the right track with it being a precision issue, how... -
- Raised to maximum priority as the issue has wider-ranging implications for playsim accuracy/compatibility.
-
- - **status**: open --> fixed
- **assigned_to**: Jaakko Keränen
- **Milestone**: v1.9.0-beta6 --> v1.11
-
- From a game play perspective, this issue has become bigger since I posted it; it now also effects missile spreads on ...
-
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/6c537575/7ce2/attachment/heretic-ext-000.jpg
-
- Are you saying you think the shadow should disappear when you are viewing it from behind the one-sided surface that c...
-
- This is caused by the Z sorting of particles, which IIRC is done separately with regard to everything else. Needs to ...
-
- Fixed for 1.9.8. When deleting the "menuselect" bindings, the default binding to Return is automatically restored so ...
-
- Requires re-testing, this may have been fixed since the report was opened.
-
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/3645c7eb/d593/attachment/HTEST.wad
-
12:53 Bug #901: [Ultimate Doom] Missing HUD/GUI fonts & textures
- missing skull
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/7ef55fb0/18bf/attachment/doom1-ult... -
- Decreased priority because FMOD is now available.
-
- Not as yet no, this still needs addressing.
-
- Is this the same issue? http://sourceforge.net/tracker/?func=detail&aid=2983702&group_id=74815&atid=542099
-
- It was partly addressed (I replaced the BOOM algorithm with the original idbsp logic).
However the larger issue he... -
- - **summary**: [Windows] Crash caused by SDL_mixer (process affinity) --> [Windows] Crash caused by SDL_mixer
- **ass... -
- This occurs because the dedicated mode finale script interpreter is trying to set up a sprite animation sequence and ...
-
- It appears the dedicated server is still trying to access the GL texture manager via some route (intermission?):
G... -
- This was in Doom2 co-op.
2012-03-01
-
- I can reproduce this in Heretic.
-
- Title screen of Hexen
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/3ba33021/3a8f/attachment/t... -
- Title picture from high resolution UI displayed incorrectly in Heretic and Hexen (tested heretic-ext and hexen). No p...
-
- May be affected by the changes in the "qapp-based" branch.
-
- Initial screen (spinning wheel on black background) displayed incorrectly if screen resolution more than 640x480. It ...
2012-02-29
-
- In Heretic, flying bad guys don't check whether a Z movement will lead to them going inside another mob and hence get...
-
- Applied a Z check after a valid XY move for build 474. Is this a sufficient fix?
-
- - **labels**: Graphics --> Graphics, Heretic
- **status**: pending --> wont-fix
-
- The windowed mode behavior is largely dictated by SDL, which we cannot influence. The cursor is released to move outs...
-
- Typing ~ in the console has been fixed for 1.9.8.
-
- Logged In: YES
user_id=717323
Done.
But it's like this:
Model {
Sub {
Skin file = "skin-file-n... -
- Yes, of course. I do it every time (in sh script). But it will bu much better to set resolution from cfg file. I've r...
-
- Are you aware that you can set the window dimensions from the command line?
For example:
-wh 2048 1536
or
-w 20... -
- It's very old and annoying problem. And there is no updates from 2008.
-
- That is because when_last is a (de)activation requirement, not a (de)activation method/trigger. You must still trigge...
-
- I could not install doomsday to home directory because "make install":
mkdir: /etc/apt: Permission denied
*** Err... -
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/2d3c72a8/ed8c/attachment/deng-apt-check.patch
-
- Compilation failed on FreeBSD while building doomsday. It could not find libld.so that is absent. The attached patch ...
-
- Weapon fire in Doom is slightly above the centre of the screen, however Dday and other ports draw the crosshair at th...
Also available in: Atom