Activity
From 2019-12-27 to 2020-01-09
2020-01-08
-
19:08 Bug #2370: [2.3 Unstable] Render Hack Regressions
- @sonicdoommario: You should be able to edit the issue description. Could you add all the remaining cases to the main ...
-
- Next build has a significantly improved missing texture detection for render hacks, so it works in all the cases of f...
-
- Thanks again for testing. Looks like many of these black spots are actually floors that appear at the incorrect heigh...
-
03:52 Bug #2370: [2.3 Unstable] Render Hack Regressions
- Did some testing with the latest build. Mostly looking into Plutonia 2, but there were a couple of things remaining f...
2020-01-07
-
15:57 Bug #2398 (New): Incorrect texture mapping
- If the wall has a middle and upper texture, and the upper texture has transparency and the ceiling is a sky texture, ...
-
- wand-splash0.tga
wand-splash1.tga
wand-splash2.tga
gwand0.tga
gwandpuff1.tga
gwandpuff2.tga
gwandpuff3.tga
gwa... -
- The reported Wight texture is now fixed. Let me know if you see other incorrectly loaded TGA images.
-
-
-
- The "noMonsters" variable became "nomonsters" when reading the profile from disk, and was no longer recognized.
2020-01-06
-
- I can reproduce this. Probably the variable is being written or restored incorrectly (or has been omitted).
-
- When you close doomsday and then open it, this setting is turned off
-
- I changed TGA files to PNG in the wand flash model. It has become normal. Is it time to abandon this vintage TGA
-
- Thanks. Could be the TGA image loader swapping or not swapping the R/B channels as needed.
-
- The color of the cloak of the undead warrior has become blue, the body also has a bluish tint. The color of the elven...
-
- Please add some more details, I'm not sure what I'm looking at here.
-
- In doomsday version 2.3.0 (3287)
-
- I addressed the Hexen map01 issue by disabling self-referencing line detection in case the lines have middle textures...
-
- Noticed a new regression in Hexen map01, where the portal is leaking out... ☑️
2020-01-05
-
-
- I noticed that the outlines disappear if you set "rend-tex-filter-sprite" to zero.
This means it's the alpha blend... -
- Thanks. Yeah I can see the outlines, will have to investigate exactly what is causing them.
-
- Made some tweaks again, the Plutonia 2 map11 issues should be resolved.
-
- Haven't investigated this yet, but it could also be an issue in Doomsday's BSP builder. Another possibility is that s...
-
- Latency issue addressed by commit:a2525878.
-
- In practice, having Episode definitions in the game profile means that those will have to be dumped to a temporary DE...
-
- @Drako:
> There should be an easy way to organize PWAD files as episodes in profiles. The PWAD files in such profile... -
- Drako wrote:
> It seems to me that it is worth to implement something slightly more general.
Added #2394 and #2395 ... -
- Custom game profiles should be exportable/importable. The exported profile could simply be a .dei file with just one ...
2020-01-04
-
17:34 Feature #2393: Map selection UI for Master Levels for Doom II (Episode with additional packages)
- It seems to me that it is worth to implement something slightly more general. Namely, there should be an easy way to ...
-
16:01 Bug #2364: Single color transparancy background edges
- Here's the Neural Upscale pack I use; it's the one you can download from doomworld but someone graciously modified it...
-
11:15 Bug #2107: [Heretic] [Hexen] Line attacks produce no sound on impact
- I believe I meant that HeXen's line attack weapons aren't making their impact sounds when they hit a wall/floor (i.e ...
2020-01-03
-
- I tried adding "compat_useblocking" to gzdoom-name.ini, it is deleted. Does not respond to "compatmode = 1". Perhaps ...
-
- I attempted to triage this quickly but failed to understand the problem. Could you elaborate a little on which a) whi...
-
- There should be a convenient way to play the Master Levels.
Possible approaches:
* Master Levels could use custom... -
- The 800/1500 area in Map23 of Alien Vendetta now renders properly, didn't see anything else broken as I was running t...
2020-01-02
-
- Perhaps a relevant compatibility setting in ZDoom:
> "compat_useblocking" (CVAR and MAPINFO) -- All special lines ...
2020-01-01
-
- Is there an already-established flag (e.g., MAPINFO) for enabling non-vanilla behavior for this?
If not, a Doomsda... -
- I would suggest making this a console cvar that defaults to off, rather than making it the standard.
This is widel... -
- skyjake wrote:
> Would you expect both the door and the other linedef(s) to be triggered together?
No, first one ... -
- And it turns out, ML_PASSUSE is "already implemented":https://tracker.dengine.net/projects/deng/repository/revisions/...
-
- This would be the PASSUSE flag 0x0200 (UDMF "passuse").
-
- Boom added an optional 'pass through' linedef flag to allow mappers to 'fix' this issue.
-
- In light of vermil's comment, converting to a feature request. Perhaps there is a different way to accomplish the sam...
-
- I really wouldn't fix this. I can't think of a reason to alter the widely ingrained vanilla behaviour, that walk over...
-
- Would you expect both the door and the other linedef(s) to be triggered together?
-
- I added a test that can detect these 3D bridge constructs with some success. Now the AV map05 sector 33 floor is no l...
-
- sonicdoommario wrote:
> Found an oddity playing Map05 of Plutonia2. This is in the starting area In the background, ... -
- sonicdoommario wrote:
> Finally, another issue appeared, although it doesn't seem to be caused by a render hack. Thi... -
- Found an oddity playing Map05 of Plutonia2. This is in the starting area In the background, you can see the Imp float...
-
- The sky is supposed to be a bright light source, so it should not subtract light from a sector, only add to it.
Co...
2019-12-31
-
- One more detail to note: because FluidSynth uses a buffer to store generated samples, changes in the gain setting bec...
-
- Nothing should occur, same with monsters
-
- What is the correct behavior for a teleport line when crossed from the back? Should it cause a teleportation, or shou...
-
- The one-time teleport linedef is deactivated if it is crossed from the back. Monsters can also deactivate this linedef
-
- * Use "stb_vorbis":https://github.com/nothings/stb/blob/master/stb_vorbis.c to decode an Ogg Vorbis music file.
* Pa... -
- Yes, that's exactly it. Сan increase the height of the ceiling, but this can lead to missing textures.
-
- To clarify: the bug is that the sector floor movement is incorrectly stuck if there is a monster whose head goes thro...
-
- It is impossible to lower a sector if there is a monster on it, the height of the height is greater than the height o...
-
- The FMOD music backend should:
* Parse the OGG file to find out if there are @LOOP_START@ and @LOOP_END@ specified i... -
- Did some research. It appears the loop tags should be easy to parse from the .ogg file (UTF-8 strings in the comments...
-
- Yes, it should not act "DR open wait close" on an open door. But, if the door is closed with the "close stay" action,...
-
- What is your proposed fix for this? Should the first "D1 open stay" override any consequent "DR open wait close" even...
-
- There is a door. From my side, it opens with the action "D1 open stay", on the reverse side it opens with the action ...
-
- It is impossible to open a door if there is an linedef for some other action in front of the door
-
- Not sure how often this hack is used, but it seems to be related to using unclosed sectors. In Map09 of Alien Vendett...
-
- Did a decent amount of testing and the issues initially reported all appear to be resolved. Even issues I was going t...
2019-12-30
-
- Further self-referencing line detection improvements to account for the case of AV MAP23.
Please test again and se... -
- sonicdoommario wrote:
> Had a chance to test, the deep water in that map is resolved, however, another issue seemed ... -
- Had a chance to test, the deep water in that map is resolved, however, another issue seemed to pop up. At the beginni...
-
-
- The Mage color is always blue also in the Player Setup screen, which indicates there is some problem with the color t...
-
- Potentially an optimization related bug with GCC 5. A possible workaround would be to selectively disable some GCC op...
2019-12-29
-
- Commit commit:a016851ad9994f makes self-referencing sector detection more sophisticated so the deep water in AV map11...
-
2019-12-28
-
- I've made a possible solution for this issue. Please test with the next unstable build (3283 or later): keep the fixe...
-
2019-12-27
-
- Yeah that was the problem. The Flatpak builds didn't set the build number in the build configuration, so at runtime i...
-
- Perhaps it's a build config bug? I'll check if the Flatpak build correctly sets the build number.
-
17:03 Feature #2381: Support for 8-bit and run-length encoded TGA images
- Why doomsday shows build number 3281 if it is not updated?
-
- The unstable Flatpaks aren't yet updated in sync with the rest of the autobuilder. I'll rebuild it now and you can up...
-
- Updated to 3281 through flatpak, but I get the same warnings, those TGA's still can not be loaded.
-
- This happens because the random variations of the bullet directions are not applied in true 3D. The direction is spec...
-
- When FluidSynth was playing music on its own (not via Doomsday's SFX backend), the music volume level was not being s...
-
- ("From the forums.":https://talk.dengine.net/discussion/2772/stereoscopic-mode-is-not-quite-adjustable)
There's no... -
- Doomsday's data file recognition code depends on a few quick-to-determine pieces of information, such as file size an...
Also available in: Atom