Activity
From 2019-12-18 to 2019-12-31
2019-12-31
-
11:12 Bug #2384: [FluidSynth] Music volume setting has no effect
- One more detail to note: because FluidSynth uses a buffer to store generated samples, changes in the gain setting bec...
-
11:09 Bug #2385: [Heretic] Deactivating a one-time teleport
- Nothing should occur, same with monsters
-
- What is the correct behavior for a teleport line when crossed from the back? Should it cause a teleportation, or shou...
-
- The one-time teleport linedef is deactivated if it is crossed from the back. Monsters can also deactivate this linedef
-
- * Use "stb_vorbis":https://github.com/nothings/stb/blob/master/stb_vorbis.c to decode an Ogg Vorbis music file.
* Pa... -
- Yes, that's exactly it. Сan increase the height of the ceiling, but this can lead to missing textures.
-
- To clarify: the bug is that the sector floor movement is incorrectly stuck if there is a monster whose head goes thro...
-
- It is impossible to lower a sector if there is a monster on it, the height of the height is greater than the height o...
-
- The FMOD music backend should:
* Parse the OGG file to find out if there are @LOOP_START@ and @LOOP_END@ specified i... -
- Did some research. It appears the loop tags should be easy to parse from the .ogg file (UTF-8 strings in the comments...
-
- Yes, it should not act "DR open wait close" on an open door. But, if the door is closed with the "close stay" action,...
-
- What is your proposed fix for this? Should the first "D1 open stay" override any consequent "DR open wait close" even...
-
- There is a door. From my side, it opens with the action "D1 open stay", on the reverse side it opens with the action ...
-
- It is impossible to open a door if there is an linedef for some other action in front of the door
-
08:55 Bug #2386 (New): [Render hack] Alien Vendetta map09: Arched upper textures (facing an unclosed sector)
- Not sure how often this hack is used, but it seems to be related to using unclosed sectors. In Map09 of Alien Vendett...
-
- Did a decent amount of testing and the issues initially reported all appear to be resolved. Even issues I was going t...
2019-12-30
-
- Further self-referencing line detection improvements to account for the case of AV MAP23.
Please test again and se... -
- sonicdoommario wrote:
> Had a chance to test, the deep water in that map is resolved, however, another issue seemed ... -
- Had a chance to test, the deep water in that map is resolved, however, another issue seemed to pop up. At the beginni...
-
-
- The Mage color is always blue also in the Player Setup screen, which indicates there is some problem with the color t...
-
- Potentially an optimization related bug with GCC 5. A possible workaround would be to selectively disable some GCC op...
2019-12-29
-
- Commit commit:a016851ad9994f makes self-referencing sector detection more sophisticated so the deep water in AV map11...
-
2019-12-28
-
- I've made a possible solution for this issue. Please test with the next unstable build (3283 or later): keep the fixe...
-
2019-12-27
-
- Yeah that was the problem. The Flatpak builds didn't set the build number in the build configuration, so at runtime i...
-
- Perhaps it's a build config bug? I'll check if the Flatpak build correctly sets the build number.
-
17:03 Feature #2381: Support for 8-bit and run-length encoded TGA images
- Why doomsday shows build number 3281 if it is not updated?
-
- The unstable Flatpaks aren't yet updated in sync with the rest of the autobuilder. I'll rebuild it now and you can up...
-
- Updated to 3281 through flatpak, but I get the same warnings, those TGA's still can not be loaded.
-
- This happens because the random variations of the bullet directions are not applied in true 3D. The direction is spec...
-
- When FluidSynth was playing music on its own (not via Doomsday's SFX backend), the music volume level was not being s...
-
- ("From the forums.":https://talk.dengine.net/discussion/2772/stereoscopic-mode-is-not-quite-adjustable)
There's no... -
- Doomsday's data file recognition code depends on a few quick-to-determine pieces of information, such as file size an...
2019-12-26
-
-
- libgui has a newer TGA loader that supports RLE in addition to plain RGB/RGBA. However, it is not used for particle t...
-
- This would be useful to improve support for old resource packs.
-
2019-12-25
-
- Currently doomsday can not load and use TGA textures that contain 8bit alpha channel only data.
Examples: jDRP Parti... -
- Fixing ded in jHRP (replaced RespawnFOG/TeleFog.dmd woth TeleFOG/TeleFog.dmd) indeed fixed the problem.
Will it be h... -
- I don't think any of those are due file path case sensitivity.
* jHRP particle00 targa is indexed and thus unsuppo... -
- Attaching screenshots of jHRP warnings and Doom addons warnings (jDRP, Hi-Res texture project, Hi-res UI).
-
- Paths in PK3 files are handled case insensitively. Do you have more examples of where errors of this sort might be ha...
-
- I think we should try a build with a newer version Fedora, so it has a more up-to-date compiler. Probably the Fedora ...
2019-12-24
-
- Linux version of Doomsday (2.3 #3278) fails to load many Heretic models and textures from jHRP because for example fo...
-
- Tested RPM 3278, same thing happens, and with Heretic too. Seems to affect every game.
-
- In flatpak version problem does not occur. However I can't figure out how to start the application properly, which pe...
-
- Does the Flatpak unstable build work for you?
I'm using Fedora 23 to build the RPM packages, and it has a rather o... -
- Trying to warp to map26 crashes doomsday. Stable 2.2 works fine.
-
- I'm using RPM doomsday-2.3.0_build3276-1.x86_64
The problem occurs without addons too. -
- Still cannot reproduce the issue.
Did you use one of the prebuilt binaries (Flatpak, dengine.net DEB/RPM, or PPA)?... -
19:28 Feature #2379 (Closed): HUD Weapon FOV 4:3 adaptation
- HUD Weapon FOV 4:3 adaptation
If HUD model is designed for 16:9 resolution, it will display with incorrect fov, wh... -
09:19 Bug #2378 (Closed): Hitscan spread changes depending on the on view angle
- The spread that gets applied to hitscans from the player's weapon seems to depend on the angle the player is looking ...
-
- Hexen uses a specific ACS script to continually spawn monsters.
Modify the cvar “game-deathkings-respawn-chance” t...
2019-12-23
-
- Forgot to mention that I did it with 2 addons enabled: XARP 0.13 and Neural Texture pack (the latter being the first ...
-
- Hmm, I just played Hexen and Deathkings with the latest unstable and everything was looking ok.
Could you attach y... -
- skyjake wrote:
> Could be a problem with the new render hack detection. Is this the first map?
Yes, Winnowing Hal... -
-
- Could be a problem with the new render hack detection. Is this the first map?
-
- In the latest unstable build 3276 (linux) Hexen can not be played due something weird going on with level geometry (s...
-
- All right, closing this issue since the view FOV is now independent and also weapon models have a smaller near plane ...
-
-
- Implemented as a cvar for 2.3: @game-deathkings-respawn-chance@, defaults to 100 (%).
-
- The respawning is being done via ACS (script 255): https://www.doomworld.com/forum/topic/92230-so-who-has-a-patch-tha...
2019-12-22
-
- skyjake wrote:
> Mainly to verify whether the fixed FOV angle for weapons in version 2.2 resolves this issue, so it ... -
- The following Doomsday Script bindings, classes, and functions have been added:
* App.getInteger()
* App.setInteger...
2019-12-21
-
- Like "On touch", things should have a script that gets run when it is killed.
The script is run before the thing e... -
- The new near plane distance for weapons is 0.5 units (was 5 units).
-
-
- Now that the weapon model has its own FOV and projection matrix, the near plane distance can be made very small. The ...
2019-12-20
-
-
- Cool, thanks for testing.
-
- For a quick update, I did a test with the latest build that includes the fix for the Arachnotrons in TNT Map31, and c...
2019-12-19
-
- The untextured upper walls are now invisible as they should.
2019-12-18
-
-
- There is a font rendering issue in the package info popup when viewing the associated readme of a PWAD. At least (onl...
-
- @vermil: Please test and see if this works as expected. Patched sprites in TNT Revilution and D2TWiD at least seem to...
-
- I've enabled sprite renaming. The DEH reader changes the names of the defined Sprites, and updates State definitions ...
-
- The patched sprites should now be working.
Also available in: Atom