Activity
From 2015-02-24 to 2015-03-09
2015-03-08
-
17:11 Bug #1969 (Closed): [Doom] Multiplayer intermission using incorrect header graphics
-
-
- If the server is in the intermission screen, a client connects, and then triggers the Fire control (to advance to the...
-
02:10 Bug #1988 (New): [MP] When spawning on a weapon, weapon fires at speed of pistol
- not sure if this is still a bug.
When spawning ontop of a weapon in deathmatch, latest doomsday stable build doomsda... -
00:36 Bug #1968 (New): [Heretic, HeXen] Player's death removes footclipping effect (viewpoint jumps abruptly)
2015-03-07
-
22:32 Bug #1968: [Heretic, HeXen] Player's death removes footclipping effect (viewpoint jumps abruptly)
- Is it possible that the death camera be made to lower to a specific height above the floor (i.e instead of lowering t...
-
- Fixing those kind of camera clipping issues is actually quite tricky. Simply checking the sector plane heights at the...
-
- Well, what I meant was, that the camera jumps up to non-footclipped position right at the start of the movement of th...
-
- When the player dies, their view height is lowered to the floor and we don't want the player looking under the floor,...
-
- Assuming that the monitors are set up as an extended desktop, it would be possible to configure a Nx1 viewgrid with a...
-
- The mif_nointermission flag was implemented during the old 1.9.0-beta days, so 1.8.6 would have baulked at its presce...
-
- I was not aware of a syntax error in the DD_DEFN lump? That said, Dday 1.8.6 appeared able to handle this syntax erro...
-
- This mod depends on various ZDoom specific features, which are not currently supported; extended MAPINFO syntax and f...
-
- Sounds like we're looking at different versions of AV since the one I'm using has seven files including two .WADs (OT...
-
11:54 Bug #1026: Load console command music oversight
- Hm, you shouldn't need the .DEH to load up AV's graphics. I started up Chocolate Doom without av.deh and everything l...
-
- sonicdoommario wrote:
> I typed in load av.wad into the title screen...
Note that Alien Vendetta is comprised of ... -
- I typed in load av.wad into the title screen on build 1525. The title screen music stops and does not switch to the A...
-
- This needs testing again with a current version of Doomsday.
-
- This was actually implemented some time ago now, for Doomsday 1.10 in fact.
-
- Closing as nowadays there are better algorithms for drawing particles.
-
- As of commit f4ab2ee Doomsday now supports gaps in Sprite frame animation sets and mimics ZDoom by hiding the sprite ...
-
-
-
-
-
-
- Further testing shows there is indeed an issue here - if one clicks to focus a presently unfocused window, while the ...
-
- I cannot replicate this on my Windows 7 dev system. As skyjake pointed out, it would be very helpful to know the step...
-
-
-
-
- Looks like a problem with that grate texture's alpha mask, rather than a problem in Doomsday itself. Id suggest repor...
2015-03-06
-
-
-
- I see. Yeah a duration of Group.Flat/Texture.Tics = -1 has never been supported as there is no "infinite" concept at ...
2015-03-05
-
- Ah so the report is actually about the text replacement strings not being abbreviated, rather than their replacing th...
-
-
- vermil wrote:
> the 'comment's' tab, that is displayed by default is sometimes erratic with regards to what, if any,... -
- Sorry, I thought DaniJ had deleted his comment (the 'comment's' tab, that is displayed by default is sometimes errati...
-
- danij wrote:
> All current versions of libdoom's inlude.ded seemingly use the correct names for these patches. Maybe... -
- I was indeed specifying -1 in a group def. As I wrote above, I wasn't sure if it was a bug or a never supported featu...
-
- The final hurdle before this can be merged to master is to update the autobuilder to use CMake. This means that Snowb...
-
-
2015-03-04
-
- danij wrote:
> If the exit conditions are converted to game rules and the cycle itself is defined in an Episode def,... -
- danij wrote:
> implementing such cycles as scripts
That is not what I meant. The idea I failed to describe in my ... -
- Thinking about the "timed exit conditions" of the map cycle - these are actually game rules. If the exit conditions a...
-
- To make clear, everything I said above was meant to be server admin controlled; none of it was meant to be client con...
-
- I agree that the most logical course of action would be to simply restart the current episode once the finale has end...
-
- STAGE 1: Dealing with the main issue
My opinion is that by default, an episode should loop back to its beginning w... -
- This work has been started in the @opengl3.3@ branch, although the crucial step of switching to @QOpenGLWindow@ has n...
-
2015-03-03
-
- I'm struggling to see a tangible benefit in implementing such cycles as scripts in and of themselves. Conceptually, a...
-
- I sincerely hope you are joking re using Episodes to represent a cycle of episodes. It makes zero sense other than in...
-
- However, to tackle this issue for the near term (with least amount of effort), even just restarting the cycle (if a c...
-
- If we were to retain the current map cycle implementation, sure, that would make sense. However, I would like to repl...
-
- Perhaps this functionality should be combined into the map cycle expression? The map cycle is already functioning at ...
-
- I didn't state or assume otherwise. My only intention was to draw attention to a point raised earlier - the apparent ...
-
- danij wrote:
> The only remaining issue that I'm seeing from the original report is the delayed minimum OpenGL versi... -
- The only remaining issue that I'm seeing from the original report is the delayed minimum OpenGL version check. You ar...
-
- Fixing this should be pretty trivial so I'll take care of it for 1.15.
-
-
- Changing things so that the project-cursor-on-UI-plane logic is used in all stereoscopic 3D modes does indeed solve t...
-
-
- @vermil: How are you specifying a duration of -1 tics? Using the old Group method? (I don't believe a duration of -1 ...
-
- Most likely the reported behavior is symptomatic of a more general issue concerning player state updates in multiplay...
-
- All current versions of libdoom's inlude.ded seemingly use the correct names for these patches. Maybe this is a repor...
-
- This issue occurs only if a replacement text is found for the map title patch and replacements are actually enabled. ...
-
- Now that the map progression is described in Episode definitions it follows that the interlude to be played during a ...
-
- To fix the underlying issue the Right Way, requires implementing a new mechanism for describing game sessions; includ...
-
2015-03-02
-
-
-
22:07 Bug #1985: Linux: Doomsday halts startup until window looses focus.
- Confirmed that the issue is now fixed.
Thanks -
- Confirmed that it builds and runs successfully with the latest build.
Thanks. -
-
-
- When the game window is very wide, the FOV setting gets maxed out too early. The behavior should be changed so that i...
-
- Currently if an episode ends, the server will get stuck in the finale animation and the only way forward is to manual...
2015-03-01
-
-
-
- CPack packaging is now set up. The produced packages still need fine-tuning with regard to metadata, installer UI gra...
-
- CMake supports WiX, so unless significant customization is required, we can switch to an @.msi@ installer quite easily.
-
2015-02-28
-
- Please check if commit:9d85dd9e compiles correctly (does for me).
-
-
- There must be a config.h on the include path that gets priority over libcommon's config.h. I'll make the #include use...
-
-
- *Update:* Modified d_config.h, d_config.h (in doom64) and h_config.h to use the absolute path for #include "config.h"...
-
- @gcc -c -pipe -std=c99 -fms-extensions -I/usr/include/assimp -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIF...
-
- I have seen something similar recently. I'll investigate...
-
-
- Additional: I am using Fedora 21 with the Nvidia 346.35 driver
-
- I have seen this issue on both Ubuntu and Fedora. Only noticed it on recent builds.
When doomsday is launched a wi...
2015-02-25
-
- This work is ongoing in the @cmake-build@ branch. The status is that one can build a fully functional Doomsday plus a...
2015-02-24
-
-
- The issue with applying special behavior to the VISIT cheat is that these are translated into a warp command automati...
-
- 1) was basically different behaviour versus Vanilla yes.
Though, perhaps the VISIT cheat should be locked to ... -
- So to clarify, 1) is a report concerning behavior that differed from vanilla, rather than being taken to the wrong ma...
-
- I'm not overly surprised this was a deliberate change (versus Vanilla). But I figure it's better to be sure :)
-
- Both the VISIT cheat and the warp XX command expect warp numbers. This means that the map you will be taken to is tha...
-
- Can you give some examples of the inputs you are trying that do not take you the map you expected? I've tried to repl...
-
- danij wrote:
> I'm guessing the problem lies in the sprite Texture generation in ResourceSystem. The name should be... -
- I've discovered that the reason why the sprites are missing is that @findTextureForAnimationStage()@ fails with a @Mi...
Also available in: Atom