Doomsday Engine

2008-10-24

19:24 Revision fa34c3fe (github): Fixed All Games: A kludge in P_MobjMoveXY prevented missiles from exploding against skyhack ceilings but they would still explode if they crossed a skyhack floor.

Handful of minor optimizations in p_map.c to avoid unnecessary DMU calls.
Clean up. danij

15:59 Revision 45b13d12 (github): Fixed compilation error with jDoom64.

danij

15:55 Revision 8d9e1164 (github): Fixed All Games: PTR_ShootTraverse would check for sky hack ceilings but not sky hack floors when looking to suppress hits.

danij

15:52 Revision bbbf010d (github): Fixed problem in calcSSecReverb which always considered flat #0 as an unknown material.

danij

15:51 Revision cc215191 (github): Fixed fakeradio bug which failed to determine that a side should be considered fully open if the neighbor linedef is twosided with a middle texture that fills the gap between floor and ceiling.

danij

15:48 Revision 235ada09 (github): Fixed bug in Rend_DoesMidTextureFillGap which used the surface material X offset in place of the Y offset.

Fixed problem of wall surfaces using flat #0 always being marked as potentially visible in Rend_MarkSegSectionsPVisible. danij

15:43 Revision b1654ef2 (github): Fixed problem of surfaces textured with flat #0 being misinterpreted as glowing surfaces (and thus fakeradio was disabled and other glitches).

danij

15:41 Revision e268e422 (github): Fixed problem of glowing wall surfaces not working.

danij

15:39 Revision b116dca9 (github): Fixed problem of rockets exploding and bullet puffs being spawned when a sky surface is hit. Caused by Doomsday returning of the material ofTypeID rather than the material num when querying DD_SKYMASKMATERIAL_NUM.

danij

14:00 Revision d5c0a4de (github): Fixed problem of the first flat being given the MATF_NO_DRAW flag. This flag was implemented to support the DOOM.exe bug where the first texture is never drawn. However the same problem is not present with flats.

danij

13:22 Feature #553 (Closed): Performance of many scrolling surface materials

Since the introduction of DMU, many scrolling surface materials on a map are currently causing significant slowdown. ... danij

11:52 Bug #552 (New): Ambient occlusion on middle surfaces of 2-sided lines

How best to handle this; Multitexture, split the poly into a 3x3 quadstrips (at most) and use vertex lighting?
*La... danij

04:53 Revision df9598f8 (github): Fixed jHexen problem of frozen things not dying either by timeout or when hit with a non-icedamage weapon.

danij

04:51 Revision 15f465ec (github): Fixed jHexen: HUD icons like the spinning Wings of Wrath are offset to the right to avoid overlaying the mana icons in the fullscreen HUD. However they were also offset when the view mode was statusbar-overlay.

danij

04:29 Bug #551 (Closed): TNT.wad MAP 07

Missing textures on lower linedefs in a few levels, especially MAP 07 in the first room. Usually around lifts / floo... mugrath

03:10 Revision 61f4f1ca (github): Renamed jHexen's SB_ChangePlayerClass to P_PlayerChangeClass and moved to plugins/common/src/p_player.c

Removed jHeretic's SB_ChangePlayerClass as it is currently unused.
Changed jHexen's version cheat to simply call the ... danij

00:17 Revision adcc9cdb (github): Fixed jHexen: Numerous problems with weapon piece display on the statusbar when semi-translucent.

Fixed jHexen: In deathmatch, the statusbar Kills label patch was not drawn if the statusbar was NOT semi-translucent.... danij

00:09 Revision 33a8e42a (github): Fixed jHeretic: When the statusbar is completely transparent the health marker chain would disappear.

danij

2008-10-23

20:52 Revision 069ebaa4 (github): Fixed problems with the incorrect lifegem being use with the jHexen statusbar when the player class was not fighter.

danij

17:48 Bug #550: Mana icon's not displayed in full screen hud

Fixed in svn for 1.9.0-beta6 danij

16:23 Bug #550 (Closed): Mana icon's not displayed in full screen hud

The Mana icon's in the full screen hud aren't displayed in the top left corner in 1.9 Beta5.x.
You just see the nu... vermil

00:30 Revision 43129f70 (github): Changed jHeretic: Revised method for drawing the chain on the jHeretic statusbar; now drawn in two sections when needed (left and right of the gem) so as to maintain a uniform alpha value for the whole chain.

Fixed jHeretic: The colour of the glowing gem on the statusbar did not change to match the player's colour (as the ge... danij

2008-10-22

23:33 Bug #549 (Closed): Sound causes Deng to freeze on linux

revision 5954.
Music does not play at all.
If music is disabled and sound is not, it does not freeze.
If sound i... eunbolt

23:33 Bug #549: Sound causes Deng to freeze on linux

backtrace log from earlier svn version
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/e532fc7f/... eunbolt

18:52 Revision 2b9b91e2 (github): Fixed bug #1673770: Problems with bouncing mobjs (flag2 MF2_FLOORBOUNCE) their Z momentum was being reduced to zero on first impact with the floor. In jHeretic this caused the firemace projectiles to explode instantly.

Also fixed a problem in jHeretic's P_SpawnMissile which wasn't determining the angle correctly if the source of the s... danij

15:58 Bug #548 (Closed): Jittery object Z position smoothing

When object position smoothing is enabled their currently seems to be a problem resulting in jittery Z movement. This... danij

15:52 Bug #435: JHeretic: Firemace problems

Fixed in svn for 1.9.0-beta6 danij

07:08 Revision e0e2ef3d (github): Fixed jHexen: The statusbar graphic features a copy of the fighter's chain which was visible behind the animated chain. Fixed by way of a kludge that cuts out that section of the statusbar and draws a near-black solid rectangle to fill the hole.

Fixed jHexen: The colour of the glowing gem on the statusbar did not change to match the player's colour (as the gem ... danij

05:08 Bug #547 (Closed): Tiny flats thrashing the materials/texture systems

Currently there is a problem where tiny flats cause constant thrashing of the material/texture systems due to the fac... danij

2008-10-20

17:00 Revision 805c1271 (github): jHexen: All patches used by both the statusbar and fullscreen HUD are now precached at startup and during an engine reset in ST_loadGraphics.

danij

16:54 Revision 3fb100cf (github): jHexen: Fixed bug in the inventory which led to the wrong artifact use function being called if P_InventoryUse was passed a artitype_e id greater than AFT_SUPERHEALTH.

danij

16:50 Revision 64b3d8ef (github): All games: Added the following default control bindings

* key-e = fly up
* key-q = fly down
* key-f = fall down
jHexen: Changed the default bindings for inventory left/right... danij

16:44 Revision d09937be (github): Changed dpatch_t->lump to lumpnum_t (was int).

danij

2008-10-19

19:24 Revision d7922977 (github): This seems to fix the view bobbing issues. The interpolation was not done between consecutive sharp views, leading to stuttering back and forth (i.e., up and down).

Pro Tip: This kind of issues are easiest to spot and debug with a low value for "settics" (in other words, in slow mo... skyjake

19:22 Revision 706bcc9e (github): IDE settings.

skyjake

16:37 Revision 2bd44e55 (github): Update.

skyjake

16:37 Revision a94e1668 (github): Fixed memory zone corruption due to out-of-bounds access of content->buffer. This occurred when texture content was being uploaded without deferring. GL_UploadTextureContent() assumed that content->buffer was modifiable, which is only the case when the content has been deferred and copied to a separate buffer. Non-deferred content is still in the zone.

skyjake

13:39 Bug #534: Unable to change resolution

Revision 5944: Fixed memory zone corruption due to out-of-bounds access of content->buffer. This occurred when textur... skyjake

2008-10-18

20:39 Revision 48580fe6 (github): jHexen-changed; ANIMDEFS and SNDINFO lumps are no longer required.

jHexen: SC_OpenLump now takes a lumpnum_t rather than lump name string to force the caller to implement the required ... danij

20:26 Revision 4038f61d (github): Fixed a couple of messages output during map load which reported incorrect linedef and sector indices (off by one errors). Updated file author details.

danij

20:26 Revision 423b3ded (github): Resolved OS X Intel compilation issues.

skyjake

20:04 Revision ad45883f (github): No need to resolve an xlinedef in XL_Thinker if this is a client (shouldn't reach here anyway).

danij

20:04 Revision f4325a74 (github): Handle NULL sector ptr in XS_Gravity

danij

19:13 Revision 63c91a95 (github): Resolving OS X compilation issues.

skyjake

19:10 Revision b7003dca (github): Switched to CMake 2.6 to resolve OS X compilation issues.

skyjake

16:55 Bug #523: lightref_original doesn't work for coloured lighting

Fixed in svn for 1.9.0-beta6 danij

16:13 Bug #528: A possible resource loading bug in Beta5

Fixed in svn for 1.9.0-beta6 danij

04:55 Revision 63aabacd (github): Fixed bug in the DED reader which failed to read the iparams of XG Line Type definitions correctly due to the flag prefix name strings (part of the game-side xgClassLinks array) being defined as zero-length strings rather than NULL ptrs.

danij

04:46 Revision edc0505e (github): Swapped the dest and src paramaters of P_CopyLine and P_CopySector to match convention.

danij

04:41 Revision 186b7475 (github): Protected the pointer based, public DMU interface from passed NULL pointers.

danij

03:21 Revision 120510ae (github): Fixed bug #1832045; If a map number is not set in an XG end_level line type the exit would take the player to the first map (instead of the next as defined by the map progression).

danij

02:17 Revision eb9c6607 (github): Fixed problem in the vs build options. Rather than generate a manifest every time, use the one in engine/win32/res

danij

01:20 Bug #493: Plane move issue

This and a lot of the other current issues with XG since the switch to DMU is due to the fact that the dummy linedef ... danij

00:22 Bug #488: end level xg class bug

Fixed in svn for 1.9.0-beta6 danij

00:00 Revision d790a438 (github): Moved the (unused) overlapping linedef detection algorithm out of the bsp generation and into edit_map.c Moved the remnants of bsp_analyze.c into more appropriate locations. Deleted the now empty bsp_analyze.c/h

danij

2008-10-17

19:29 Revision ecb6f9a2 (github): Continued work on the map loader and BSP generation:

* Revised the algorithm used to detect "one-way windows" to remove use of the glbsp concept of edgetips and instead u... danij

2008-10-16

21:17 Bug #545: Skymodels coords are wrong

ok, nevermind, forget about the last followup/comment I added. fixed positioning was my fault.
The offset order is... eunbolt

03:03 Bug #545: Skymodels coords are wrong

I think the whole offset part is broken.
It offset's the model from the camera and not the 0,0,0 map coords
-----... eunbolt

19:02 Revision 342e7171 (github): These seem unnecessary at the moment. Assuming that the portable sys_sdl_window.c should be used instead.

skyjake

03:27 Bug #536: Escape key has no effect.

"You can bring up the menu when you first start the game..."
should be:
"You can bring up the menu when you fir... mochtroid-x

03:26 Bug #536: Escape key has no effect.

When I said pause, I meant how in single player it would pause the game and bring up the menu. You can bring up the m... mochtroid-x

2008-10-15

19:32 Revision 20a0413c (github): Fixed a handful of rendering glitches that would occur with segs on twosided linedefs when the back sector floor height was higher than the back sector ceiling height. In this instance we now lower the high floor to the ceiling.

danij

19:27 Revision aa9bea6c (github): Now that we arn't culling sectors with no linedefs during map load, protect P_Iterate from trying to walk the sector object lists as they might not be present.

danij

03:45 Revision 89be26da (github): Pruning of redundant map data objects cannot yet be done, due to the problem of their original indices being used as references to them in several ways, which have not been updated accordingly. As this is quite a lot of work I've simply disabled the pruning for now.

danij

03:40 Revision 84ee19f3 (github): Fixed blue locked doors not showing in the automap in jDoom, jDoom64 and WolfTC.

danij

2008-10-14

03:41 Bug #546: Spider Boss shoots too high

I can verify this, though the spider mastermind does not aim high, but has a problem with aiming in general.
In th... mochtroid-x

00:08 Bug #546 (Closed): Spider Boss shoots too high

When playing against the Spider "mastermind", it shoots too high. This can be seen by going into the plutonia wad, 1... jon13

00:01 Bug #544: jDRP models facing wrong direction?

I have seen this too. Linux/SDL. Last version tried (from svn) was a month or two ago. jon13

2008-10-13

11:14 Bug #543: Polyobjs completely missing

DaniJ - I can confirm this bug on Linux -amd64, 64bit build, svn revision 5924 yagisan

09:26 Bug #543: Polyobjs completely missing

SVN Head is working fine for me under Vista. The map loads fine and all polyobjs are present with no warnings.
I s... danij

09:52 Bug #542: Microphone volume keeps on MUTING!

Doomsday does not use a microphone for any purpose, nor are the settings for which altered.
I would guess this is ... danij

2008-10-12

23:37 Bug #545 (Closed): Skymodels coords are wrong

When adding skymodels by position deng reads the ded incorrectly: using the info from here http://sjke.org/dew/index.... eunbolt

11:28 Bug #534: Unable to change resolution

Further investigation shows that during AM_LoadData() (called from G_UpdateState during reset), GL_UploadTextureConte... skyjake

2008-10-11

20:17 Bug #544 (Closed): jDRP models facing wrong direction?

The jDRP models seem to face wrong directions - e.g. zombiemen walking backwards, imps walking sideways, enemies poin... mochtroid-x

15:29 Bug #543 (Closed): Polyobjs completely missing

When starting jHexen and MAP01 all the polyobj doors are completely missing. There are warnings in the console:
P_... skyjake

15:22 Bug #534: Unable to change resolution

To make it crash, I use Ultimate Doom, start E1M1 and then "setres" to a different resolution (windowed mode). skyjake

15:16 Bug #534: Unable to change resolution

I'm seeing this problem in OS X. Seems related to decorations and materials?
Process: Doomsday [25669]
Path:... skyjake

09:42 Bug #542 (Closed): Microphone volume keeps on MUTING!

when ever i play heretic or doom using ANY version of the doomsday engine, when i exit, and i go to sound settings, a... korndude19883

01:08 Revision 0741c969 (github): Quick fix to the vertical offset problem in the conversion of lumobjs to vlights.

danij

01:06 Revision 3ca211b8 (github): Fixed decoration origin offsets on pegged top and unpegged bottom surfaces.

danij