Project

General

Profile

Activity

From 2008-10-02 to 2008-10-15

2008-10-15

19:32 Revision 20a0413c (github): Fixed a handful of rendering glitches that would occur with segs on twosided linedefs when the back sector floor height was higher than the back sector ceiling height. In this instance we now lower the high floor to the ceiling.
danij
19:27 Revision aa9bea6c (github): Now that we arn't culling sectors with no linedefs during map load, protect P_Iterate from trying to walk the sector object lists as they might not be present.
danij
03:45 Revision 89be26da (github): Pruning of redundant map data objects cannot yet be done, due to the problem of their original indices being used as references to them in several ways, which have not been updated accordingly. As this is quite a lot of work I've simply disabled the pruning for now.
danij
03:40 Revision 84ee19f3 (github): Fixed blue locked doors not showing in the automap in jDoom, jDoom64 and WolfTC.
danij

2008-10-14

03:41 Bug #546: Spider Boss shoots too high
I can verify this, though the spider mastermind does not aim high, but has a problem with aiming in general.
In th... mochtroid-x
00:08 Bug #546 (Closed): Spider Boss shoots too high
When playing against the Spider "mastermind", it shoots too high. This can be seen by going into the plutonia wad, 1... jon13
00:01 Bug #544: jDRP models facing wrong direction?
I have seen this too. Linux/SDL. Last version tried (from svn) was a month or two ago. jon13

2008-10-13

11:14 Bug #543: Polyobjs completely missing
DaniJ - I can confirm this bug on Linux -amd64, 64bit build, svn revision 5924 yagisan
09:26 Bug #543: Polyobjs completely missing
SVN Head is working fine for me under Vista. The map loads fine and all polyobjs are present with no warnings.
I s... danij
09:52 Bug #542: Microphone volume keeps on MUTING!
Doomsday does not use a microphone for any purpose, nor are the settings for which altered.
I would guess this is ... danij

2008-10-12

23:37 Bug #545 (Closed): Skymodels coords are wrong
When adding skymodels by position deng reads the ded incorrectly: using the info from here http://sjke.org/dew/index.... eunbolt
11:28 Bug #534: Unable to change resolution
Further investigation shows that during AM_LoadData() (called from G_UpdateState during reset), GL_UploadTextureConte... skyjake

2008-10-11

20:17 Bug #544 (Closed): jDRP models facing wrong direction?
The jDRP models seem to face wrong directions - e.g. zombiemen walking backwards, imps walking sideways, enemies poin... mochtroid-x
15:29 Bug #543 (Closed): Polyobjs completely missing
When starting jHexen and MAP01 all the polyobj doors are completely missing. There are warnings in the console:
P_... skyjake
15:22 Bug #534: Unable to change resolution
To make it crash, I use Ultimate Doom, start E1M1 and then "setres" to a different resolution (windowed mode). skyjake
15:16 Bug #534: Unable to change resolution
I'm seeing this problem in OS X. Seems related to decorations and materials?
Process: Doomsday [25669]
Path:... skyjake
09:42 Bug #542 (Closed): Microphone volume keeps on MUTING!
when ever i play heretic or doom using ANY version of the doomsday engine, when i exit, and i go to sound settings, a... korndude19883
01:08 Revision 0741c969 (github): Quick fix to the vertical offset problem in the conversion of lumobjs to vlights.
danij
01:06 Revision 3ca211b8 (github): Fixed decoration origin offsets on pegged top and unpegged bottom surfaces.
danij

2008-10-10

22:19 Bug #541 (Closed): Jittery view bobbing
Currently there is a problem with the view bobbing being especially jittery.
*Labels:* Graphics danij
22:18 Bug #540 (Closed): Alt+Tab disables mouse turning
When the mouse-x axis is used to turn the player, pressing Alt+Tab when in-game to switch between applications will d... danij
22:12 Bug #539 (Closed): Missing plane glow after material change
If a surface changes from a non-glowing to a glowing material, the surface is updated and will glow as expected. Howe... danij
19:45 Revision 1c580768 (github): Fixed various issues in the conversion from lumobj to vlight for the purposes of sprite and model lighting.
TODO: The debug display I added to draw the light vectors affecting a given sprite indicate that there are a few rema... danij
18:11 Revision 20e3c91c (github): Reinstated the soft limits for max number of vlights affecting sprites and models.
danij
16:17 Revision e65b021e (github): Fixed bug #2143145 - DOOM2/Final DOOM incorrect screen border flat.
danij
15:46 Revision d007928d (github): Fixed svn head bug #2156065 - Rckt and Cell ammo switched in the statusbar.
danij
13:45 Bug #518: Characters Have No Sound When Jumping
Is this a bug? Does original Hexen make sounds when the player jumps (other than the landing "umph")? danij
13:41 Bug #534: Unable to change resolution
I have no problems at all with changing resolution or even going from fullscreen to windowed mode using the current s... danij
13:39 Bug #536: Escape key has no effect.
Esc works just fine for me, for both entering and exiting the menu. It isn't set to pause the game by default.
Mor... danij
13:17 Bug #531: Doom2/Final Doom incorrect screen border flat
Fixed in svn rev #5920 danij
12:47 Bug #537: Rocket and cell ammo switched.
Fixed in svn rev #5919 danij
00:13 Bug #537: Rocket and cell ammo switched.
Screenshot shows the incorrect listing of ammo.
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/... mochtroid-x
00:13 Bug #537 (Closed): Rocket and cell ammo switched.
The numbers displayed in the original Doom HUD for rocket and cell ammo report wrong amount (RCKT displays cell ammo,... mochtroid-x
12:41 Bug #538: FPS counter stops working.
This is related to the changes to the management of the console font. Displaying the console will reselect the font a... danij
00:17 Bug #538: FPS counter stops working.
Screenshot shows inactive FPS counter.
*Attachments:*
* http://sourceforge.net/p/deng/bugs/_discuss/thread/192e0b8c/... mochtroid-x
00:17 Bug #538 (Closed): FPS counter stops working.
After loading the next level in play, the FPS counter stops working and displays a blank blue box - see picture.
U... mochtroid-x

2008-10-09

22:38 Bug #536 (Closed): Escape key has no effect.
While you can bring up the menu with it once Doomsday starts, any other use of esc has no effect - e.g. esc does not ... mochtroid-x
22:31 Bug #535 (Closed): Unable to change mouse settings.
When you attempt to change mouse settings in svn 5018 you are instead greeted with a difficulty selection that begins... mochtroid-x
22:30 Bug #534 (Closed): Unable to change resolution
In svn 5018 you are unable to change to resolution higher than 640x480 without a crash or the screen being extremely ... mochtroid-x

2008-10-08

16:23 Revision 368644c3 (github): Always do a full tex reset on change to the mipmapping mode.
danij
14:27 Revision 1c3c636d (github): Changed pClassInfo->turnSpeed to int.
danij

2008-10-07

18:19 Revision e4a637e7 (github): Fixed typo in R_MaterialNumForName that would always return zero regardless of whether the material was found (doh!).
danij
16:17 Revision 5f75ed01 (github): Fixed incorrect memory allocation error in R_PrecacheLevel, thanks to Yagisan for the heads up.
danij
15:52 Revision a0b816f6 (github): Fixed only log in R_MaterialNumForName when the name being searched for is not found.
danij
15:48 Revision 0f49c60b (github): Fixed R_MaterialCheckNumForName and R_MaterialNumForName could not handle NULL name ptr.
danij
15:46 Revision 0bd1aa47 (github): Removed unused members from vissprite_t
danij
15:33 Revision 89969488 (github): Fixed potential segfault in dpWADMapConverter::IsSupportedFormat under nix where as Thomas Lübking points out; the libc implementation of strncmp cannot handle a NULL string ptr.
danij
15:18 Revision 7a8f35b9 (github): Fixed segfault in M_InitControlsMenu under nix as pointed out by Thomas Lübking and Yagisan.
danij
15:10 Bug #532: Compiler Errors
Fixed in svn. danij
15:09 Bug #533: Deng often crashes on startup
Fixed in svn. danij
13:21 Bug #533: Deng often crashes on startup
Forgot to say this is runnning on linux.
It has been happening for a long time with the svn builds. eunbolt
13:20 Bug #533 (Closed): Deng often crashes on startup
Many times when trying to start deng svn build post beta5 It segfaults.
Here Is a backtrace I did
---------------... eunbolt
14:00 Revision 3d3740c3 (github): Fixed player turn rate in P_PlayerThinkLookAround, turnSpeed is fixed point, not float.
danij

2008-10-06

17:17 Revision 408c2363 (github): Applied the CMAKE_BUILD_TYPE patch.
skyjake
03:04 Revision 0b540487 (github): Fixed issue of mobj shadows not being drawn correctly (couldn't be seen at all).
danij

2008-10-05

21:07 Revision a7b47b6a (github): Fixed all FTBFS issues with r_things.c due to recent work that had been left incomplete due to my accident.
Note there remains an issue in that currently the max number of vertex lights per model is ignored, I'll address this... danij
12:52 Feature #1473: Multiple Dedicated Server Manager
This is unnecessary as multiple instances of Doomsday can be run at once on the server. In this scenario remember to ... danij
12:39 Bug #532: Compiler Errors
This is a known issue that will be resolved imminently. danij

2008-10-04

02:34 Bug #532 (Closed): Compiler Errors
I'm compiling using Visual Studio 9. I'm running Windows XP x86 Professional. I did a checkout of trunk r5905.
Bel... mrdoommaster

2008-10-03

19:03 Revision f98c28a7 (github): Fixed various errors when trying to compile Doomsday.
danij
17:58 Revision ddf9e9a3 (github): Win32: Always update the viewport(s) after change to the window dimensions.
danij
17:48 Revision fca6d64c (github): Began refactoring the player inventory so as to separate the management from the effects of the artifacts themselves. Also redesigned the interface somewhat to make it easier to use and eliminated some of the unnecessary members of player_t used with the inventory.
I'll continue with this post 1.9.0-beta6 danij

2008-10-02

21:43 Bug #531 (Closed): Doom2/Final Doom incorrect screen border flat
A tiny tiny thing.
In 1.9 Beta5.x, Doom2 and Final Doom are using the same screen border flat as Doom1 (DEMI1_5), ... vermil
10:56 Feature #1474 (Rejected): Customization options for object shadows
Ability to control the "simple shadow" effect that Dday places under all things when they aren't in a full bright sta... vermil
10:29 Bug #513: Infine control oversights
A follow up on this. Player movement by mouse isn't disabled while they are in interactive mode. vermil
 

Also available in: Atom