Doomsday Engine

2006-10-26

20:52 Revision 60c204af (github): Flag up some more 64bit errors

yagisan

19:37 Revision a94cf431 (github): Flag up some more 64bit errors

yagisan

06:05 Revision 28a3b6c0 (github): Revised vertexowner (sectors + lines) allocation and processing. New code should be a lot faster but is a little more complex.

Implemented on a tip off from the Risen3D sources. Note however, this new code is not at all based on that in Risen3D... danij

04:49 Revision 314d3247 (github): The linesInSector and ssecsInSector tables are only used during P_GroupLines, they do not need to exist for the life of the current level. Now freed when exiting that routine. Changed the allocation mechanism to M_Malloc, no need to use the zone. Made a few more zone allocations PU_LEVELSTATIC where appropriate.

danij

2006-10-25

20:32 Revision 03dce6c2 (github): subsector_t->numverts should be short not char.

danij

20:17 Revision bf0f13da (github): Changed line_t->sidenum to side ptrs for convenience.

danij

2006-10-24

20:35 Revision 7fe2a0ca (github): When selecting a list the detail texture (if any) is used when comparing against the primitive to be written. This makes primitives with the same texture to be seen as unique if they have different detail textures and thus they will be added to separate lists (needed for the new debug rendering mode "rend-tex = 2").

danij

02:06 Revision 09b0281d (github): Further tweaks to improve transitioning to/from a camera; no change in viewheight (fixed perceived "jump" when leaving camera mode).

danij

2006-10-23

23:54 Revision 169a9bf7 (github): Fixed BUG #1582440: Glowing textures don't work on mid textures.

danij

23:20 Revision 263248dd (github): Fixed bug #927603: XG Wind bug. Mobjs affected by sectors with floor/ceiling wind when they straddled the sector on a ledge above/below.

danij

20:54 Bug #380: Glowing textures don't work on mid textures

Logged In: YES
user_id=849456
Fixed in SVN for 1.9.0-beta5. danij

20:29 Bug #275: Model skins not rendered in D3D

Logged In: YES
user_id=849456
Is this now fixed in the lastest version? danij

20:26 Bug #203: General network instability

Logged In: YES
user_id=849456
Closing as too old. danij

20:24 Feature #1318: Creating Bullet Holes

Logged In: YES
user_id=717323
Yes, a decal system would mean proper edge clipping. The decals
would be rendered pr... skyjake

20:21 Bug #170: XG Wind bug

Logged In: YES
user_id=849456
Yep, you are correct. We should not be using mobj->floorz in
this comparison as it i... danij

16:42 Revision 2fa3229b (github): Fixed missing par time stat in intermission.

danij

16:20 Revision 49ebf4e0 (github): Fixed bug where the cheats CF_CLIP and CF_GODMODE were always deactivated when changing back to a "real" player from a camera.

danij

2006-10-22

17:12 Bug #380 (Closed): Glowing textures don't work on mid textures

Glowing textures don't work on mid textures with
transparrent parts.
Though it works if you place said texture ... vermil

14:26 Revision c7ac735d (github): Fixed usage of the ambient lighting cvar. The user-set value was being incorrectly reset on map load due to the fact that r_ambient was being used to hold the value of the cvar.

danij

2006-10-21

18:59 Revision 1d22fa00 (github): Removed MAXBUTTONS fixed limit.

danij

2006-10-19

12:51 Revision 493e1999 (github): Doxygen updates. Make sure we generate in UTF-8 so it doesn't look like a grabled mess O_O

yagisan

2006-10-18

18:56 Revision a0aa03dc (github): Implemented engine-side CCmd parameter validation as discussed previously, as a preparatory step for the planned integration of a scripting language into the console later in the 1.9.x series. CCmds can opt-out of engine-side validation by not specifying a usage control string when registered.

TODO: Split console commands with different actions depending on number of parameters; apply the "overloaded" functio... danij

13:42 Bug #323: [DOOM/HEXEN/HERETIC] Console command 'warp' without space

Logged In: YES
user_id=849456
Fixed for Doomsday 1.9.0-beta5.
Will be commited to SVN soon. danij

2006-10-16

15:44 Bug #379: Heretic e1m5 stairs won't rise

Logged In: YES
user_id=849456
This is a known bug in 1.9.0-beta4 and has been reported
numerous times in this trac... danij

04:02 Bug #379 (Closed): Heretic e1m5 stairs won't rise

I am using v1.9.0-beta4 of Doomsday and am playing
Heretic. On level e1m5, after retrieving the yellow
key, I hit... eightballz

00:57 Revision d528a05b (github): Added missing new line at file end.

danij

00:21 Revision 4fd72f67 (github): Extracted the colour-keying and image alpha checking into separate routines and moved to gl_tex.c

danij

2006-10-15

20:32 Revision 929600c1 (github): Began splitting gl_tex.c into smaller files. Separated all the texture management routines out and into gl_texmanager.c. gl_tex.c now consists entirely of image manipulation algorithms.

danij

20:27 Revision c307326e (github): Changed to UTF-8.

danij

16:57 Revision 3ec82c92 (github): Remove duplicate flare texture.

danij

2006-10-14

23:43 Revision 1a6dfeeb (github): Fixed segv problem with "rend-tex 2" (thanks yagisan).

Fixed lighting discrepancies (light adaptation was being applied twice for mobj sprites and models). Minor tweaks in ... danij

17:44 Revision 202f52db (github): Moved more decisions affecting rendpolys further up the logic hierarchy to make better use of surface_t.

Fixes for bugs with shiny textures and polyobjects introduced by recent changes. danij

06:41 Revision 364ae81a (github): Implemented a new rendering mode to help debug lighting issues. Setting cvar "rend-tex 2"; Doomsday will render all world surfaces using the gray.png texture.

danij

04:28 Revision 105added (github): Store pre calculated floating point coords for vertexes in seg_t. Save having to FIX2FLT() every time we need them (several thousand times per frame).

danij

02:12 Revision d4009431 (github): Fixed an inaccuracy in the defined value of PI.

danij

02:03 Revision 9882d13b (github): Replaced numerous instances of divide by 255 in time critical code with multiplication by reciprocal255 (the value taken for this is from the Risen3D source).

danij

00:57 Revision a4194d89 (github): Changed to UTF-8.

danij

00:49 Revision ab83fec3 (github): Use Memory management wrappers. Clean up.

danij

00:06 Revision 7ddec61a (github): More fixes for warnings produced by gcc.

danij

2006-10-13

20:22 Revision 65cdd2b9 (github): Fixed a few more compiler warnings (gcc).

danij

19:41 Revision 54911b8b (github): Use the seg facing flag instead of recalculating in the dynlight code (optimize).

danij

18:58 Revision aa568ddd (github): Fixed typo.

danij

18:50 Revision 8368038f (github): Use Memory management wrappers. Clean up.

danij

06:49 Revision 19a53221 (github): Moved (f/dd/div)vertex_t members (x,y (z)) into pos[VX, VY (VZ)].

danij